Honda Accord

1998-1999 of release

Repair and operation of the car



Honda Chord
- Cars of the Honda Accord brand
   Identification numbers of the car
   Acquisition of spare parts
   Technology of service, tool and equipment of a workplace
   Poddomkrachivaniye and towage
   Security system of an audio equipment
   Start of the engine from the auxiliary power supply
   Automobile chemicals, oils and greasings
   Diagnostics of malfunctions of knots and systems of the car
   - Governing bodies and methods of operation
      Access, protection
      Elements of security systems of the car
      Equipment of the car, arrangement of devices and governing bodies
      Comfort
      Methods of operation
+ Settings and routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Electric equipment of the engine
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment


Governing bodies and methods of operation

Specifications

Main technical characteristics of the car

 


Mass-dimensional characteristics
Overall dimensions, mm
Length 4595
Width 1750
Height
KY models 1445
Except the KY model 1430
Base
Models of 2.2 l 2670
Except model of 2.2 l 2668
Track
forward wheels
Models of 2.2 l 1507
Except model of 2.2 l 1495
back wheels
Models of 2.2 l 1515
Except model of 2.2 l 1504
Masses, kg  
The equipped weight 1265 + 1395
Maximum admissible weight gross car (EU)
Models of 1.6 l 1740
L models 1.8 and 2.0 1890
Models of 2.2 l 1820
The maximum permissible load on an axis (EU)
Forward axis
Models of 1.6 l 910
L models 1.8 and 2.0 1010
Models of 2.2 l 960
Back axis
Models of 1.6 l 890
L models 1.8 and 2.0 900
Models of 2.2 l 870
The maximum admissible mass of the loaded car on ADR (model of 2.2 l)
1580
The maximum admissible full mass of the towed trailer *
Trailers without brake mechanisms 500
Trailers with brake mechanisms
Models of 1.6 l and 1.8 l with AT 1200
Models of 1.8 l with RKPP 1300
Models of 2.0 l 1400
Models of 2.2 l 1500
The maximum permissible vertical load on the hinge of the hook-on device, kgf
50
* Cars for delivery to Germany: the specified admissible full mass of the towed trailer is valid for roads with a longitudinal bias of 12%. Concerning increase in mass of the towed trailer address to documentation delivered with the car or consult on HUNDRED Honda.
Filling volumes, l
fuel tank Approximately 65
Engine cooling system
Models with RKPP
When replacing cooling liquid *
Models of 1.6 l 3.9
L models 1.8 and 2.0 4.2
Models of 2.2 l 3.3
Full volume
Models of 1.6 l 4.6
L models 1.8, 2.0 and 2.3 5.8
Models of 2.2 l 6.9
Models of 3.0 l 5.9
Models with AT
When replacing cooling liquid * 4.1
Full volume 5.7
* Including the volume of cooling liquid in a broad tank and the liquid rest in a shirt of cooling of the engine (Capacity of a broad tank = 0.55 l)
Tank of liquid of washing of a windshield
Models without washers of lenses of head headlights 4.5
Models with washers of lenses of head headlights 6.9
Lubrication system of the engine, l
When replacing oil
Including an oil filter
Models of 1.6 l 3.3
L models 1.8, 2.0 and 2.3 4.3
Models of 2.2 l 4.8
Models of 3.0 l 4.4
Without an oil filter
Models of 1.6 l 3.0
L models 1.8, 2.0 and 2.3 4.0
Models of 2.2 l 4.5
Models of 3.0 l 4.1
Full capacity
Models of 1.6 l 4.0
L models 1.8, 2.0 and 2.3 5.6
Models of 2.2 l 5.9
Manual box of gear shifting
When replacing transmission oil
L models 1.6, 1.8 and 2.0 1.8
L model 2.2, 2.3 1.9
Full capacity
L models 1.6, 1.8 and 2.0 1.9
L model 2.2, 2.3 2.0
Automatic transmission
When replacing transmission oil
except 3.0 l 2.5
3.0 l 2.9
Full capacity 6.1
Arrangement of points of fastening of the hook-on device

Designation of the size Size, mm
(1) 874
(2) 869
(3) 825
(4) 430
(5) 423
(6) 894
(7) 840
(8) 770
(9) 852
(10) 946
(11) 1100

Symbols About designated places of fastening of the hook-on device. Symbols ^ designated provisions of the center of the hinge of the hook-on device.

Spark plugs
Types of the applied spark plugs
Engines with a volume of 1.6 l, 1.8 l (KY), 2.3 l
NGK candles ZFR5F-11
DENSO candles KJ16CR-L11
Engines with a volume of 1.8 l (except KY) and 2.0 l
NGK candles ZFR6F-11
DENSO candles KJ20CR-L11
Engines with a volume of 2.2 l
NGK candles ZFR6F-11
DENSO candles KJ20CR-L11
Engines of 3.0 l
NGK candles PZFR5F-11
Nominal size of interelectrode gaps, mm of 1.1 mm
Driving belts
(Concerning engines 2.3 and 3.0 of l address to Specifications of the Head Nastroyki and routine maintenance)
The demanded belt deflection size on a site in the middle between two pulleys by firm pressing a thumb, in mm
Models of 1.6 l
Generator drive belt 7.0 + 10.5
Belt of the drive of the steering pump 10.5 + 14.0
Air conditioner compressor drive belt 7.5 + 9.5
All other models
Generator drive belt
Models, without K/B 10.0 + 13.0
The models equipped To/in 10.0-s-12.0
Belt of the drive of the steering pump 13.0 + 16.5
RKPP
Moments of gear shifting of RKPP
From the 1st transfer on the 2nd 15 km/h
From the 2nd transfer on the 3rd 35 km/h
From the 3rd transfer on the 4th 50 km/h
From the 4th transfer on 5th 70 km/h
The maximum admissible speed of the movement on various transfers, km/h
Models of 1.6 l
1st transfer 50
2nd transfer 95
3rd transfer 135
4th transfer 185
L model 1.8 or 2.0
1st transfer 50
2nd transfer 90
3rd transfer 130
4th transfer 170
Models of 1.8 l 7CV KG
1st transfer 50
2nd transfer 95
3rd transfer 140
4th transfer 205
Models of 2.2 l
1st transfer 60
2nd transfer 95
3rd transfer 130
4th transfer 185
Automatic transmission
The maximum speed in provisions of the selector
Transfer High-speed range, km/h
"1" 64
"2" 113
"D3" 166
Moments of gear shifting of AT
with 1 on 2 More than 10 km/h
with 2 on 3 More than 10 km/h
with 3 on 4 More than 27 km/h
with 2 on 1 No more than 50 km/h
with 3 on 2 No more than 101 km/h
with 4 on 3 No more than 147 km/h
Marking of tires and disks

Designation of the sizes of tires
On a lateral surface of the tire there is a marking by which it is possible to determine the main characteristics of the tire, including its sizes.
Tire identification number:

185/70R1488H
185 - Width of the tire, mm
70 - Index of a series of the low-profile tire (profile height relation to width of a profile of the tire, %)
R - Symbol of the tire of a radial design
14 - Landing diameter of the tire, in inches
88 - A loading capacity index (a symbol of most allowed load of the tire) of N - a speed Index
High-speed categories of tires
Speed index Maximum admissible speed of the movement, km/h
Q 160
S 180
T 190
N 210
V 240
W 270
ZR Over 240
Designations of the sizes of disks

On each disk there is a marking which comprises important data on the sizes of a wheel and a form of a zakraina of a rim.

Disk identification number:

15x6 JJ
15 - Landing diameter, in inches
6 - Rim profile width, in inches
JJ - Symbol of a form of section of an onboard zakraina.
Wheels

Parameters of tires are given in Schild, the driver's door of the car fixed on a forward rack.

Standard sizes of disks and tires,
Disks
Models of 1.6 l 14x51/2J
L models 1.8 and 2.0 15x6J
15x6JJ (only for cast disks)
Models of 2.2 l 17X7JJ
Tires
Models of 1.6 l 185/70R14 88H
L models 1.8 and 2.0 195/60R15 88V
Models of 2.2 l 215/45R17 87W