Honda Accord

1998-1999 of release

Repair and operation of the car



Honda Chord
+ Cars of the Honda Accord brand
+ Settings and routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Electric equipment of the engine
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   Care of components of a body and bottom of the car
   Care of vinyl elements of finishing
   Care of an upholstery and carpets of salon
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and locks of the car
   Replacement wind and other fixed glasses
   Removal, installation and adjustment of provision of a cowl
   Removal and installation of a latch of the lock of a cowl and cable of its drive
   Removal and installation of overlays of forward and back bumpers
   Removal and installation of forward wings
   Removal, installation and adjustment of a cover of a luggage compartment
   Removal and installation of a latch and cylinder of the lock of a cover of a luggage compartment
   Driving cables of an otpuskaniye of locks of a cover of a luggage compartment and door of the hatch of a jellied mouth of a fuel tank
   Removal and installation of panels of an internal upholstery of doors
   Removal, installation and adjustment of provision of doors
   Removal and installation of a latch and external handle / cylinder of the lock of a door
   Removal and installation of door glasses
   Removal and installation of regulators of window regulators
   Removal and installation of rear-view mirrors
   Removal and installation of the central console
   Removal and installation of finishing sections of the dashboard
   Removal and installation of a casing of a steering column
   Removal and installation of the main section of the dashboard
   Removal and installation of a forward fairing
   Removal and installation of seats
   Removal and installation of the back shelf
   Geometrical sizes of various options of execution of a body
+ Onboard electric equipment
+ Schemes of electric equipment


Влияние факторов на уловистость водоема при рыбалке

Removal and installation of forward wings

 PERFORMANCE ORDER

1. Weaken nuts of fastening of the corresponding forward wheel. A car front also establish to Poddomkratta it on props. Remove a wheel.
2. Remove an overlay of a front bumper (see the Section Removal and installation of overlays of forward and back bumpers).

3. Turn out fixing screws, release clamps and remove a loker of protection of an arch of a wheel with a rubber mudguard.

4. Open a forward door and turn out the top bolt of fastening of back part of a wing to a body.

5. Turn out fixing screws and remove an external plastic protective overlay of a threshold for the purpose of ensuring access to the lower bolt of fastening of back part of a wing.

6. Turn out the remained fixture.

7. Give the remained bolts of fastening of a wing.

8. Remove a wing (it will be reasonable to use the help of the assistant for the purpose of minimization of risk of damage of surrounding body panels).
9. Installation is made upside-down.