Honda Accord

1998-1999 of release

Repair and operation of the car

Как выбрать туристическую палатку?

Driving cables of an otpuskaniye of locks of a cover of a luggage compartment and door of the hatch of a jellied mouth of a fuel tank

Cable of an otpuskaniye of the lock of a cover of a luggage compartment

PERFORMANCE ORDER

1. The description of procedures of removal of a latch of a cover of a luggage compartment and detachment from it a driving cable is provided in the Section Removal and installation of a latch and the cylinder of the lock of a cover of a luggage compartment.

2. In luggage take a spare wheel, then remove the left lateral panel of finishing with a ware pocket for the purpose of ensuring access to a tip of a cable of the drive of an otpuskaniye of the lock of a cover of the hatch of a jellied mouth of a fuel tank. Turn a cable tip on 1/4 turns with the purpose and take from assembly of a door.

3. Remove the lower part of a back seat (see the Section Removal and installation of seats). On models of the Compartment remove also a back of a back seat.
4. Having hooked, remove overlays of thresholds of doors from the driver's party of the car (on Compartment models a door one). On 4-cylinder models remove the lower panel of finishing of the left central rack.
5. Unbend a carpet, having provided access to a driving cable of an otpuskaniye of the lock. Release all intermediate clamps of conducting of a cable.
6. Having hooked, open the top cover of the castle cylinder in a casing of the lever of a remote otpuskaniye of the lock near a driver's seat. Insert a key into the lock and sharply turn it counterclockwise, then take a key together with the cylinder from assembly.
7. Remove a small plastic cover from lateral face of the lever of a remote otpuskaniye of the lock and weaken the bolt located under it (use a face key, having pushed its head through an opening under installation of the castle cylinder. Shift a lever casing for removal it from a bolt back.

8. Turn a casing and take a cable cover from a clamp, and a core tip - from the lever.

9. Tie up a string piece by the end of a cable.
10. Involve assembly of a cable in a luggage compartment so that the string which is tied up by its end seemed.
11. Tie up a string to a tip of a new cable and stretch assembly in regular situation, having connected it to the lever. Further assembly is made as it should be, the return to an order of dismantle of the corresponding components.