Honda Accord

1998-1999 of release

Repair and operation of the car



Honda Chord
+ Cars of the Honda Accord brand
+ Settings and routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Electric equipment of the engine
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   Care of components of a body and bottom of the car
   Care of vinyl elements of finishing
   Care of an upholstery and carpets of salon
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and locks of the car
   Replacement wind and other fixed glasses
   Removal, installation and adjustment of provision of a cowl
   Removal and installation of a latch of the lock of a cowl and cable of its drive
   Removal and installation of overlays of forward and back bumpers
   Removal and installation of forward wings
   Removal, installation and adjustment of a cover of a luggage compartment
   Removal and installation of a latch and cylinder of the lock of a cover of a luggage compartment
   Driving cables of an otpuskaniye of locks of a cover of a luggage compartment and door of the hatch of a jellied mouth of a fuel tank
   Removal and installation of panels of an internal upholstery of doors
   Removal, installation and adjustment of provision of doors
   Removal and installation of a latch and external handle / cylinder of the lock of a door
   Removal and installation of door glasses
   Removal and installation of regulators of window regulators
   Removal and installation of rear-view mirrors
   Removal and installation of the central console
   Removal and installation of finishing sections of the dashboard
   Removal and installation of a casing of a steering column
   Removal and installation of the main section of the dashboard
   Removal and installation of a forward fairing
   Removal and installation of seats
   Removal and installation of the back shelf
   Geometrical sizes of various options of execution of a body
+ Onboard electric equipment
+ Schemes of electric equipment




Removal and installation of door glasses

Glasses of forward doors

 PERFORMANCE ORDER

1. Remove the panel of an internal upholstery of a door and the moisture filter (see the Section Removal and installation of panels of an internal upholstery of doors).
2. Completely lower glass.

3. Raise glass so that access to its fixture through the openings which are specially provided in a doorframe opened.

4. Cover with rags the upper edge of glass, then give two fixing bolts.
5. Extract glass from door assembly through a window opening.
6. Installation is made upside-down.

The main and motionless flew down back doors

 PERFORMANCE ORDER

1. Remove the panel of an internal upholstery of a door and the moisture filter (see the Section Removal and installation of panels of an internal upholstery of doors).
2. Lower glass so that access to bolts on the directing opened. Weaken bolts and, holding glass, push directing back. Having released glass from directing, accurately lower it in the lower situation.

3. Release an internal sealing strip from a doorframe and a back trench, having provided thereby a necessary weak point for extraction of a trench. Release an external sealing strip from a door, having provided possibility of a reversing of the top screw of a trench.

4. Delay the directing trench of glass forward, having separated it the fixed glass, then take a trench from a door at the top and leave hanging on a sealing strip (not to damage a paint and varnish covering of the door panel, cover the last with an old towel).
5. Now the main glass can be extracted from a doorframe through a window opening.
6. Afterwards, in case of need it is possible to remove the fixed door glass, - act carefully as glass can be put rather hardly.
7. Installation is made upside-down. If the sealing strip does not manage to be put rather hardly, use the special cementing structure. Until cement hardening the strip can be recorded by means of an adhesive tape.

Before tightening screws of fastening of the main glass, densely put him in forward sending to the trench.

The back fixed window leaves (Compartment model)

 PERFORMANCE ORDER

Performance of replacement of the back fixed window leaves demands from the performer of certain skills and experience and it has to be entrusted to specialists of car service.