|
1. Remove the panel of an internal upholstery of a door and the moisture filter (see the Section Removal and installation of panels of an internal upholstery of doors).
2. Remove a windowpane (see the Section Removal and installation of door glasses).
3. On the models equipped with the electric drive of window regulators, disunite the socket of an electrical wiring of the driving motor of the regulator.
4. Turn out bolts of fastening of assembly of the regulator / a driving electric motor of a door window regulator.
5. On models of the Compartment regulators of scissors type are used. Before a reversing of fixing bolts mark situation back a bolt top roller directing. Turn out bolts top and back roller directing, then give four bolts of fastening of an electric motor (on models with the manual drive - window regulator handles).
6. Take assemblies of the lever of the equalizer and the regulator through specially provided opening in a doorframe.
7. Installation is made upside-down. Do not forget to grease rollers directing and rubbing regulator surfaces. |