Honda Accord

1998-1999 of release

Repair and operation of the car



Honda Chord
+ Cars of the Honda Accord brand
+ Settings and routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Electric equipment of the engine
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Search of causes of failures of electric equipment
   Safety locks - the general information
   Chain breakers
   The relay - the general information and check of serviceability of functioning
   Check of serviceability of functioning and replacement of the breaker of indexes of turns / alarm system
   Check of serviceability of functioning and replacement of understeering switches
   Check of serviceability of functioning and replacement of the switch of ignition and lock of blocking of a steering column
   Check of serviceability of functioning and replacement of switches of the dashboard
   Check of serviceability of functioning of measuring instruments of a combination of devices
   Removal and installation of a combination of devices
   Removal and installation of the radio receiver and loudspeakers
   Removal and installation of the antenna of the radio receiver
   Replacement of lamps of head headlights
   Adjustment of the direction of optical axes of head headlights
   Replacement of block headlights
   Replacement of lamps
   Running fires of light time of day (DRL)
   Check of serviceability of functioning and replacement of an electric motor of the drive of screen wipers
   Check of serviceability of functioning and replacement of horns of a horn
   Check of serviceability of functioning and recovery repair of a heater of back glass
   Control system of speed (tempostat) - general information and check of serviceability of functioning
   The electric drive of window regulators - general information and check of serviceability of functioning
   The uniform lock - general information and check of serviceability of functioning
   The electric drive of external rear-view mirrors - general information and check of serviceability of functioning
   Safety cushions - the general information
+ Schemes of electric equipment




Replacement of lamps of head headlights

Flasks of lamps of halogen type are filled with the gas which is under pressure and at sharp stirring can blow up. Try to take such lamps only for a socle and use goggles. Remember that at a flask contact naked fingers on glass are fatty spots that leads to a premature exit of a lamp out of operation as a result of an overheat. Before installation wipe a lamp flask alcohol.


 PERFORMANCE ORDER

1. Open a cowl.
2. For an otpuskaniye of a clamp squeeze the socket case behind a lamp.

3. Turn assembly of the boss with a lamp counterclockwise (looking at a block headlight behind).

In case of need previously remove a broad tank of the cooling system of the engine (when replacing a lamp of the right head headlight on 4-cylinder models and left - on the V6 models).

4. Take a cartridge with a lamp from the block headlight case.
5. Having pulled on itself, take a lamp from the boss.
6. In case of need carrying out replacement of the boss disconnect from it an electrical wiring.
7. Trying not to touch a flask with naked fingers, put a new lamp in a cartridge, then fill assembly in a block headlight for what track correctness of combination of uvulas of a clamp with grooves in the headlight case. After input of assembly in a landing opening turn it for fixing clockwise against the stop.
8. Connect an electrical wiring and check serviceability of functioning of a block headlight.