Honda Accord

1998-1999 of release

Repair and operation of the car



Honda Chord
+ Cars of the Honda Accord brand
+ Settings and routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Electric equipment of the engine
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Search of causes of failures of electric equipment
   Safety locks - the general information
   Chain breakers
   The relay - the general information and check of serviceability of functioning
   Check of serviceability of functioning and replacement of the breaker of indexes of turns / alarm system
   Check of serviceability of functioning and replacement of understeering switches
   Check of serviceability of functioning and replacement of the switch of ignition and lock of blocking of a steering column
   Check of serviceability of functioning and replacement of switches of the dashboard
   Check of serviceability of functioning of measuring instruments of a combination of devices
   Removal and installation of a combination of devices
   Removal and installation of the radio receiver and loudspeakers
   Removal and installation of the antenna of the radio receiver
   Replacement of lamps of head headlights
   Adjustment of the direction of optical axes of head headlights
   Replacement of block headlights
   Replacement of lamps
   Running fires of light time of day (DRL)
   Check of serviceability of functioning and replacement of an electric motor of the drive of screen wipers
   Check of serviceability of functioning and replacement of horns of a horn
   Check of serviceability of functioning and recovery repair of a heater of back glass
   Control system of speed (tempostat) - general information and check of serviceability of functioning
   The electric drive of window regulators - general information and check of serviceability of functioning
   The uniform lock - general information and check of serviceability of functioning
   The electric drive of external rear-view mirrors - general information and check of serviceability of functioning
   Safety cushions - the general information
+ Schemes of electric equipment


Корисні властивості родзинок

Replacement of lamps

Flasks of lamps remain hot within about 20 minutes after shutdown of illuminants. Before getting to work make sure that components finally cooled down.

Forward indexes of turns / marker lights

 PERFORMANCE ORDER

1. Remove plastic push-button clamps and delay the panel of a loker of protection of an arch of a wheel for the purpose of ensuring access to assembly of the index of turn / a marker light behind back.

For the purpose of providing due working space develop forward wheels in the relevant party.

2. Turn a cartridge of a lamp counterclockwise and take it from a casing of assembly of a lamp.

3. Having pulled, take a lamp from the boss.
4. Installation is made upside-down.

Forward parking fires

 PERFORMANCE ORDER

1. Open a cowl and turn a cartridge of a lamp of forward parking fire on 1/4 turns counterclockwise for extraction it from assembly of a lamp.

2. Having pulled a lamp, take it from the boss.
3. Installation is made upside-down.

Back indexes of turns and stoplights / marker lights (body section of the back combined lamp)

 PERFORMANCE ORDER

On the considered models the back combined lamps consist of two sections one of which is established on a body, the second - on a trunk lid. Indexes of turns and stoplights / back marker lights are a part of body section. The section established on a cover of a luggage compartment consists of lamps of a backing and, besides, back dimensions.

1. Open a trunk lid, release clamps and unbend the carpet panel of finishing of a luggage compartment back, having provided thereby access to lamps of body assembly of the back combined lamp.

2. Turn a cartridge of the corresponding lamp on 1/8 turns counterclockwise and take it from a casing of lantern assembly. Having pulled, release a lamp from the boss. Installation is made upside-down.

Fires of a backing and back dimensions (the section of the back combined lamp established on a trunk lid)

 PERFORMANCE ORDER

1. Open a cover of a luggage compartment. Turn a cartridge of the corresponding lamp on 1/8 turns counterclockwise and take it from lantern assembly.

2. Having pulled, release a lamp from the boss.
3. Installation is made upside-down.

Stoplights of the top level

 PERFORMANCE ORDER

1. Open a trunk lid. The cartridge of a lamp of a stoplight of the top level is filled from below to the back shelf of salon.

2. Turn a cartridge counterclockwise and take it from the shelf panel. Having pulled, release a lamp from the boss.

3. Installation is made upside-down.

Illumination of registration plate

 PERFORMANCE ORDER

1. Release assembly of a lamp of illumination of registration plate from the body panel.

2. Having released clamps, separate a lamp lens from assembly of the boss with a lamp.

3. Having pulled, release a lamp from the boss.
4. Installation is made upside-down.

Illumination of devices

 PERFORMANCE ORDER

1. Remove a combination of devices (see the Section Removal and installation of a combination of devices).

2. Turn a lamp cartridge counterclockwise and take it from assembly of a combination of devices.

3. Having pulled, release a lamp from the boss.
4. Installation is made upside-down.

Track that replaceable lamps corresponded on the performance data which failed. Lamps of illumination of measuring instruments have big rated power, than lamps of light indicators.

Internal lamps (salon, luggage compartment)

 PERFORMANCE ORDER

1. Replacement of lamps of all internal lamps is made in an identical manner. First of all it is necessary to remove an assembly plafond, having accurately hooked it the sting of a small screw-driver which is pasted over with an adhesive tape (see an accompanying illustration).

2. Release a lamp from spring plugs of the boss (see an accompanying illustration). If there is a need for a lamp poddevaniye, start the lever only under edges of socles of a lamp in order to avoid damage of a flask.

3. Installation is made upside-down.