The device, service and repair of Honda Accord - Rotation of wheels//Honda the Chord of 1998-1999 of century /

Honda Accord

1998-1999 of release

Repair and operation of the car



Honda Chord
+ Cars of the Honda Accord brand
- Settings and routine maintenance
   General information about settings and adjustments
   Check of levels of liquids
   Check of a condition of tires and pressure of their rating
   Check of level of liquid of the power steering
   Check of the ATF AT level
   Replacement of motive oil and oil filter
   Check of a state and replacement of brushes of screen wipers
   Check, service and charging of the battery
   Check of a state, adjustment of effort of a tension and replacement of driving belts
   Check of a state and replacement of the hoses located in a motive compartment
   Check of a condition of components of the cooling system
   Rotation of wheels
   Check of brake system
   Check of a condition of seat belts
   Replacement of the filtering air cleaner element
   Check of a condition of components of a power supply system
   Check of level of the RKPP transmission oil
   Survey of components of a suspension bracket and steering drive, check of a condition of protective covers of power shafts
   Check of a condition of components of system of production of the fulfilled gases
   Check of a state and replacement of spark plugs
   Check of a state and replacement of VV of candle wires, cover and runner of the distributor
   Check and replacement of the valve of system of the operated ventilation of a case (PCV)
   Check and adjustment of turns of idling
   Service of the cooling system (depletion, washing and filling)
   Replacement of brake fluid
   Replacement of liquid of automatic transmission (AT/CVT)
   Replacement of the RKPP transmission oil
   Replacement of filters of the air conditioning system
   Check and adjustment of gaps of valves (necessarily)
   Dropping indicator of intervals of routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Electric equipment of the engine
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment





Rotation of wheels

(each 12 000 km [7 500 miles] of run or time in 6 months)

The recommended order of rotation of the wheels completed with S NENAPRAVLENNYM tires a protector

1 — Left forward
2 — Right forward

3 — Left back
4 — Right back


The recommended order of rotation of the wheels completed with tires With the DIRECTED protector

1 — Left forward
2 — Right forward

3 — Left back
4 — Right back


Rotation of wheels has to be made regularly according to the schedule of routine maintenance of the car, and also at identification of signs of uneven wear of protectors. At rotation the car has to be lifted over the earth - take an opportunity and check also a condition of components of brake system (see the Section Check of Brake System).

Authors of this manual recommend to make rotation of the wheels equipped with radial tires according to the offered schemes. The majority of models are completed with tires with not directed protector, otherwise pay attention to difference of an order of performance of procedure. It is easy to distinguish the directed tires on existence on a sidewall of the arrow specifying the correct direction of rotation of a wheel. Two tires with the right direction of rotation and two - with left have to be included in the package.

The detailed description of procedure of change of wheels is stated in Poddomkrachivaniye's Section and towage. Watch reliability of fixing of the car in the lifted situation.

It will be most correct to lift all car over the earth, - use the winch, or the car and install to a poddomkratta it on the props got under frame longerons (use for fixing of the car in the lifted situation less than four props is inadmissible by no means!).

Upon completion of rotation check pressure of a rating of tires, correct it according to standard requirements. Make sure of reliability of fastening of wheels nuts (in an ideal wheel nuts should be tightened a dinamometrichesky key and to make repeated check through 40 km [25 miles] of run).

More detailed information on wheels and tires is provided in the Head Podvesk and a steering.