Honda Accord

1998-1999 of release

Repair and operation of the car



Honda Chord
+ Cars of the Honda Accord brand
- Settings and routine maintenance
   General information about settings and adjustments
   Check of levels of liquids
   Check of a condition of tires and pressure of their rating
   Check of level of liquid of the power steering
   Check of the ATF AT level
   Replacement of motive oil and oil filter
   Check of a state and replacement of brushes of screen wipers
   Check, service and charging of the battery
   Check of a state, adjustment of effort of a tension and replacement of driving belts
   Check of a state and replacement of the hoses located in a motive compartment
   Check of a condition of components of the cooling system
   Rotation of wheels
   Check of brake system
   Check of a condition of seat belts
   Replacement of the filtering air cleaner element
   Check of a condition of components of a power supply system
   Check of level of the RKPP transmission oil
   Survey of components of a suspension bracket and steering drive, check of a condition of protective covers of power shafts
   Check of a condition of components of system of production of the fulfilled gases
   Check of a state and replacement of spark plugs
   Check of a state and replacement of VV of candle wires, cover and runner of the distributor
   Check and replacement of the valve of system of the operated ventilation of a case (PCV)
   Check and adjustment of turns of idling
   Service of the cooling system (depletion, washing and filling)
   Replacement of brake fluid
   Replacement of liquid of automatic transmission (AT/CVT)
   Replacement of the RKPP transmission oil
   Replacement of filters of the air conditioning system
   Check and adjustment of gaps of valves (necessarily)
   Dropping indicator of intervals of routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Electric equipment of the engine
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment


Survey of components of a suspension bracket and steering drive, check of a condition of protective covers of power shafts

(each 24 000 km [15 000 miles] of run or time in 12 months)

The condition of components of a suspension bracket and the steering drive has to be made regularly as their wear or damage can be the reason of reduction of service life of tires, conduct to decrease in controllability of the car and increase of fuel consumption.

Check of a condition of shock-absorbers

 PERFORMANCE ORDER

1. Park the car on an equal horizontal platform, whenever possible with a hard coating. Firmly cock the parking brake and check pressure of a rating of tires.
2. Press one of car corners down. At a corner otpuskaniye the body has to come back to a starting position, making no more than one-two fluctuations.
3. Rocking of a body with high degree of probability testifies to wear or weakening of the corresponding shock-absorber.
4. Repeat procedure, serially passing to the remained car corners.
5. The car also establish to Poddomkratta it on props.

6. Attentively examine shock-absorbers on existence of signs of leak of liquid. Existence of a thin oil film should not cause concern. Without fail make sure that a source of leak is the shock-absorber, in case of need make replacement of shock-absorbers in a set (forward and back).

7. Check reliability of fastening of shock-absorbers on the support. In case of detection of defects replace shock-absorbers (also in a set).
8. The description of procedure of replacement of shock-absorbers is provided in the Section Replacement of the Shock-absorber or Screw Spring of Rack-mount Assembly.

Check of a condition of components of a suspension bracket and steering drive

 PERFORMANCE ORDER

1. Visually check components of a suspension bracket and the steering drive for existence of deformations and mechanical damages. Estimate a condition of sealing cuffs, protective covers and rubber-metal plugs, try not to pass signs of development of leaks.

2. Clear the lower surface of a rotary fist of dirt traces, ask the assistant to grasp bottom edge of a wheel and to pull it in the cross direction. Try to estimate visually a side play in spherical support of connection of a fist with a suspension bracket control lever. In the presence of a side play the worn-out hinge is subject to replacement.

3. Grasp forward and back edges of a wheel, then press on a first line and pull for the back. In case of identification of a side play in joints of components of the steering drive check a condition of the pendular lever and tips of steering drafts. Pass to other board of the car and repeat procedure, having pulled an opposite wheel.

4. More detailed information on a design of components of a suspension bracket is provided in the Head Podvesk and a steering.

Check of a condition of protective covers of power shafts

 PERFORMANCE ORDER

1. The corrugated rubber covers established since both ends of each of power shafts are urged to protect hinges of equal angular speeds (CV JOINTS) from the destructions connected with hit of dirt in them. Hit of oil and greasing on a surface of covers can lead to their premature destruction. It is expedient to wash out covers solution of soap water from time to time. In view of a constant flexure at turns of wheels, covers of external CV JOINTS wear out quicker and have to be checked more often and more regularly.

2. Attentively check covers for existence of cuts, cracks and other damages, estimate reliability of fixing them bandage tapes. In case of detection of defects, or traces of leak of greasing the damaged cover is subject to replacement (see the Head Stsepleniye and power shafts).