Honda Accord

1998-1999 of release

Repair and operation of the car



Honda Chord
+ Cars of the Honda Accord brand
- Settings and routine maintenance
   General information about settings and adjustments
   Check of levels of liquids
   Check of a condition of tires and pressure of their rating
   Check of level of liquid of the power steering
   Check of the ATF AT level
   Replacement of motive oil and oil filter
   Check of a state and replacement of brushes of screen wipers
   Check, service and charging of the battery
   Check of a state, adjustment of effort of a tension and replacement of driving belts
   Check of a state and replacement of the hoses located in a motive compartment
   Check of a condition of components of the cooling system
   Rotation of wheels
   Check of brake system
   Check of a condition of seat belts
   Replacement of the filtering air cleaner element
   Check of a condition of components of a power supply system
   Check of level of the RKPP transmission oil
   Survey of components of a suspension bracket and steering drive, check of a condition of protective covers of power shafts
   Check of a condition of components of system of production of the fulfilled gases
   Check of a state and replacement of spark plugs
   Check of a state and replacement of VV of candle wires, cover and runner of the distributor
   Check and replacement of the valve of system of the operated ventilation of a case (PCV)
   Check and adjustment of turns of idling
   Service of the cooling system (depletion, washing and filling)
   Replacement of brake fluid
   Replacement of liquid of automatic transmission (AT/CVT)
   Replacement of the RKPP transmission oil
   Replacement of filters of the air conditioning system
   Check and adjustment of gaps of valves (necessarily)
   Dropping indicator of intervals of routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Electric equipment of the engine
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment





Check of a state and replacement of VV of candle wires, cover and runner of the distributor

(each 48 000 km [30 000 miles] of run or time in 24 months)

 PERFORMANCE ORDER

1. Check of a condition of VV of wires has to be made every time when replacing spark plugs.
2. Check begins with external survey of isolation of wires at the working engine. Tire out the car to the dark room, start the engine and make sure of lack of sparking on wires. Sparking is an isolation breakdown sign. Try not to touch moving components in a motive compartment. Make necessary marks on replacement of defective wires, then let's the engine cool down and start checks of a condition of a cover and the runner of the distributor of ignition.
3. Check of candle wires is made serially in order to avoid violation of an order of their connection at assembly. Usually on isolation of firm wires there is the corresponding marking. In case of absence that, put it independently by means of an adhesive tape and a marker.

4. Disconnect VV a wire from a spark plug (best of all use the special tool). Do not pull for a wire, only for its tip at all.

5. Examine internal walls of a tip. Corrosion is usually shown in the form of a fragile korkoobrazny raid of white color.
6. Pull a tip back on a shaft of the candle, make sure of density of its landing. In case of need again remove a tip and turn in plugs in a rubber cover.
7. Pure rags wipe a wire on all its length, having completely removed traces of dirt and greasing from an isolation surface. Examine isolation of a wire on existence of cracks, traces of a progar and other damages. Try not to bend a wire under acute angles in order to avoid violation of integrity of veins of the conductor in isolation.
8. Disconnect a wire from the distributor (again pull only for a tip, but not for a wire). Check a tip for existence of signs of corrosion, estimate density of landing it on the plug. Again connect a wire to the distributor.
9. Working in a similar manner, serially check a condition of all remained candle wires. Make sure of reliability of their connection to candles and plugs of the distributor.
10. In need of performance of replacement of VV of wires track that replaceable wires corresponded on the standard size to parameters of the engine of your car. In firm shops of automobile accessories and service centers of the Honda company it is always possible to get sets of VV of the wires, ready to the use cut on length and equipped with tips. Remove and replace wires serially in order to avoid violation of an order of ignition.
11. Having turned out fixing screws, uncover the distributor. Attentively check a cover both outside, and from within for existence of cracks, coal paths, traces of a progar, weakening of contact connections and other damages.

 

12. Weaken the fixing screw and remove the runner from a shaft of the distributor and examine it on existence of cracks and coal paths. Make replacement of defective components.

13. Good practice is replacement of a cover and the runner of the distributor of ignition regardless of their state every time at installation of new VV of wires. When using old components carefully smooth out contact surfaces of their plugs and measure the resistive resistance of wires and a roof (see Specifications to the present Chapter).
14. At installation of a new cover of the distributor transfer to it from old VV of a wire, connecting them it is strict in a former order, - try not to disconnect all wires at the same time, transfer them serially.

The order of ignition is specified in Specifications at the beginning of the present Chapter. On the majority of models the protective ledge of the plug of connection of a wire of a spark plug of the first cylinder on a cover of the distributor is appropriately marked.