Honda Accord

1998-1999 of release

Repair and operation of the car



Honda Chord
+ Cars of the Honda Accord brand
+ Settings and routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Electric equipment of the engine
- Engine management
   System of onboard diagnostics (OBD) - the principle of functioning and codes of malfunctions
   Removal and PCM/ECM installation
   Check of serviceability of a state and replacement of the sensor of provision of a butterfly valve (TPS)
   Check of serviceability of a state and replacement of the sensor of absolute pressure in the pipeline (MAR)
   Check of serviceability of a state and replacement of the sensor of temperature of the soaked-up air (IAT)
   Check of serviceability of a state and replacement of the sensor of temperature of cooling liquid of the engine (eats)
   Check of serviceability of a state and replacement of the sensor of VMT/provision of a cranked shaft (TDC/CKP)
   Check of serviceability of a state and replacement of the sensor of position of pistons (CYP)
   Check of serviceability of a state and replacement of the detector of control of electric loadings (ELD)
   Check of serviceability of a state and replacement of the sensor switch of pressure in system of hydrostrengthening of a wheel (PSP)
   Check of serviceability of a state and replacement of the oxygen sensor (l-probe)
   Check of serviceability of a state and replacement of the sensor of a detonation
   Check of serviceability of a state and replacement of the sensor of speed of the movement of the car (VSS)
   Check of serviceability of functioning and replacement of the valve of stabilization of turns of idling (IAC)
   Check of serviceability of functioning and replacement of the air valve of correction of composition of air and fuel mix (FIA)
   System of the operated ventilation of a case (PCV)
   System of recirculation of the fulfilled gases (EGR) - the general information, check of a state and replacement of components
   System of catching of fuel evaporations (EVAP) - the general information, check of a state and replacement of components
   The catalytic converter - the general information, check of a state and replacement
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment




Check of serviceability of functioning and replacement of the air valve of correction of composition of air and fuel mix (FIA)

CHECK

 PERFORMANCE ORDER

1. The considered system provides supply of the cleared air in injection injectors in the course of functioning of the engine. Supply of additional air allows to make impoverishment of air and fuel mix and to provide its fuller combustion during acceleration.
2. Start the engine, accelerate it to 3000 rpm and wait for operation of the fan of the cooling system. Dump engine turns to the single.

3. Disconnect a hose of air supply of the FIA valve from an inlet sleeve and connect the vacuum gage to a hose.

4. Manually open a butterfly valve, then completely close it. Depth of depression has to change with change of turns of the engine.
5. In the absence of variations of depth of depression check correctness of laying and a condition of vacuum hoses. If hoses as it should be, replace the FIA valve.

REPLACEMENT

 PERFORMANCE ORDER

1. Turn out a fixing bolt and remove the FIA valve from a delivery chamber of an air path.

2. Installation is made upside-down.