The device, service and repair of Honda Accord - Comfort//Honda the Chord of 1998-1999 of century /

Honda Accord

1998-1999 of release

Repair and operation of the car



Honda Chord
- Cars of the Honda Accord brand
   Identification numbers of the car
   Acquisition of spare parts
   Technology of service, tool and equipment of a workplace
   Poddomkrachivaniye and towage
   Security system of an audio equipment
   Start of the engine from the auxiliary power supply
   Automobile chemicals, oils and greasings
   Diagnostics of malfunctions of knots and systems of the car
   - Governing bodies and methods of operation
      Access, protection
      Elements of security systems of the car
      Equipment of the car, arrangement of devices and governing bodies
      Comfort
      Methods of operation
+ Settings and routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Electric equipment of the engine
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment





Comfort

Systems of heating, ventilation and air conditioning

At the correct use of opportunities of systems of heating and ventilation in salon of the car comfortable conditions of stay are provided and fogging of glasses is excluded.

If the car upon purchase was not equipped with the air conditioning system, it can be mounted and established in any time, convenient for the owner, at any time install this system on the car, address on car repair shop of the Honda company.

Control panel functioning of systems of ventilation, heating and air conditioning

.


Handle of a choice of the high-speed mode of the fan

Rotation of the handle on a chasovoystrelka leads to increase in frequency of rotation of the fan and, therefore, intensity of air supply in salon of the car. Transfer of the handle to extreme right situation leads to shutdown of the fan.

Air temperature regulator handle

Rotation of the handle clockwise leads to increase in temperature of the air car coming to salon.

Air conditioner switch

The A/S button is intended for inclusion and switching off of the conditioner of air. At turning on of the conditioner the control lamp which is built in the button lights up.

Switch of heating of back glass

The button of the switch is also equipped with the built-in control lamp which is lighting up at heating inclusion.

The switch of the mode of the closed air circulation

By means of this button inclusion of the mode of the closed air circulation in salon of the car is made. The button is equipped with the built-in control lamp. At inclusion of the mode the salon of the car is isolated from the atmosphere and inflow to it of fresh air stops. The fan provides air circulation on the closed contour. By repeated pressing the button (the control lamp has to go out), supply of fresh air in salon will be resumed.

Handle of switching of the directions of distribution of air

 

The handle is intended for a choice of the mode of distribution of air on salon.

Air supply via lateral deflectors of the dashboard is carried out in all modes. The general scheme of distribution of an air stream is submitted on an illustration.

External air comes to salon via the central and lateral ventilating deflectors of the dashboard.
External air comes to salon at the same time via the central and lateral ventilating deflectors in the control panel, and also through the lower air vents which provide air supply in driver's and passenger foot wells.
Supply of external air only driver's and passenger foot wells is carried out.

External air comes to salon at the same time through the nozzles of an obduv of a windshield which are built in in the control panel from above near the lower edge of glass and through the lower air vents of foot wells.
External air arrives on having blown in a windshield through the nozzles which are built in in the control panel from above near the lower edge of glass.

Control of deflectors of ventilating grates

Nozzles of the central air ducts of the dashboard are equipped with the special zhalyuziyny deflectors allowing to regulate a deviation of the given air stream both in horizontal and in vertical the planes. Control of deflectors is exercised with the help vstroyennykhv a lattice snuffled rychazhok.

Lattices of lateral air ducts of the dashboard have a similar design. Besides, possibility of complete cessation of supply air through them is provided.

Instructions on use of systems of ventilation, heating and air conditioning

Detailed maintenance instructions of systems of heating, ventilation and air conditioning in various climatic conditions are given below. Information how to provide effective ventilation, heating and cooling of air in salon of the car, and also how quickly to remove from glasses a kondensant and hoarfrost is provided to attention of the reader.

All considered systems function only at the started engine. As a working body for a heater cooling liquid of the engine is used. If the engine is not heated-up up to the normal working temperature, some minutes before in salon warm air starts moving will be required. Operation of the air conditioning system does not depend on temperature of cooling liquid of the engine.

In absolute majority of cases the best efficiency of functioning of the systems providing a comfortable microclimate is reached in the giving mode in salon of external air, inclusion of the mode of the closed circulation, especially at the idle conditioner of air, leads to fogging of glasses and increase of a spertost of air therefore it is recommended to include this mode only in case of need and for rather short time, for example, at the movement on the district with the filled with smoke or polluted atmosphere. As soon as need of isolation of salon disappears, giving in salon of fresh air has to be resumed.

External atmospheric air comes to systems of heating and conditioning through the reception lattice located before a windshield and equipped with a fairing. Periodically clean openings of a reception lattice from leaves and the other garbage complicating air passing.

Ventilation of salon


The system of a supply and exhaust ventilation provides air in salon of the car. The fresh air arriving through a forward reception lattice circulates on salon and then is removed through the exhaust outlets located near back glass:

a) Turn the air temperature regulator handle counterclockwise against the stop. Check that the conditioner of air was switched on.
Ь) Install the handle of switching of the directions of air supply in situation. The mode of the closed air circulation has to be switched off.
c) By means of the handle of a choice of the high-speed mode of the fan establish the demanded intensity of air supply in salon.

Cooling of air in salon of the car

1 Cooling of salon is made as follows:

a) Turn on the air conditioner, having pressed the A/S button, - the control lamp which is built in the switch has to light up.
b) Check that the handle of the regulator of air temperature was turned in extreme left situation.
c) Install the handle of switching of the directions of air supply in salon.
d) At high humidity of external air include the mode of the closed circulation, at low humidity - the mode of inflow of fresh air;
e) By means of the handle of a choice of the high-speed mode of the fan establish the demanded intensity of air supply in salon.
2 If the car staid a long time on the sun and air in salon strongly heated up, quickly to reduce temperature in salon as follows:

a) Start the engine;
b) Turn on the air conditioner (A/S button). Check that the handle of the regulator of air temperature was turned in extreme left situation;

c) By means of the handle of a choice of the high-speed mode of the fan establish the maximum intensity of air supply in salon;
d) Partially slightly open windows and turn the handle of switching of the direction of distribution of air in situation. Include the mode of inflow of fresh air.

After air temperature in salon decreases to the acceptable level, close windows and set the normal mode of air conditioning

Operation of the air conditioning system leads to increase of load of the car engine therefore it is necessary to watch closely an arrow of the index of temperature of cooling liquid, moving with frequent stops and at a small speed in the conditions of an intense city cycle, or overcoming long raising of the considerable steepness. At approach of an arrow of the index to the red range of a scale, temporarily switch off the air conditioner until temperature of the engine does not return to norm.

Heating of salon of the car

To lift air temperature in salon of the car, execute the following manipulations:

a) Start the engine;
b) Install the handle of switching of the directions of distribution of air in situation. The mode of the closed air circulation has to be switched off;
c) By means of the handle of a choice of the high-speed mode of the fan establish the demanded intensity of air supply in salon;
d) Turning the air temperature regulator handle in that or an inuyustorona, establish desirable degree
air.

Heating of salon with simultaneous drainage of air by means of the conditioner

During the work of central air humidity of air in salon of the car decreases therefore simultaneous inclusion of systems of heating and conditioning allows to make air in salon of the car warm and dry.
a) Turn on the fan;
b) Turn on the air conditioner;
c) Install the handle of switching of the direction of distribution of air in situation. The mode of the closed air circulation has to be switched off;
d) Pororachivy the air temperature regulator handle in this or that party, establish desirable degree of heating of the air coming to salon. In this mode cold air from the conditioner mixes up with warm air from a heater.

Joint inclusion of systems of heating and air conditioning can be applied in any traffic conditions, when temperature of surrounding 0 °C.

Removal from glasses of condensate and hoarfrost


It is possible to clear internal surfaces of glasses of the condensed moisture as follows:
a) Turn on the fan;
b) At the corresponding complete set of the car turn on the air conditioner;
c) Install the handle of switching of the directions of distribution of air in situation. The mode of the closed air circulation has to be switched off. Some options of execution of the car provide possibility of automatic inclusion of the mode of supply of fresh air and its conditioner by installation of the handle of switching of the directions of distribution of air in situation
d) Turn the air temperature regulator handle in such situation that warm air moved through nozzles of an obduv of a windshield;
e) Include an electric heater of back glass for faster removal of the condensed moisture from its surface. On some options of execution of the car if the handle of switching of the directions of distribution of air is in any situation except, the conditioner of air remains included. For switching off of the conditioner press the А/С button.

To remove from an external surface wind and lateral glasses the hoarfrost or ice formed after the parking of the car on the street in frosty weather, execute the following manipulations:

a) Include ignition, povernuvklyuch in the lock in situation "ON" (II);
b) Install the handle of switching of the directions of distribution of air in situation. The mode of the closed air circulation has to be switched off. Some options of execution of the car provide possibility of automatic inclusion of the mode of supply of fresh air and the conditioner, by installation of the handle of switching of the modes of the direction of distribution in situation;
c) Turn the air temperature regulator handle in an extreme pravoyepolozheniye (the maximum heating of air) and turn on the fan on the maximum speed;
d) Start the car engine.

For acceleration of cleaning of a windshield of hoarfrost or ice it is recommended to include the mode of the closed air circulation in very cold weather at first. After the windshield is exempted from frost, resume supply of fresh air for the purpose of prevention of fogging of glasses.

In the mode of an obduv of glasses all given to salon of air arrives through the slot-hole nozzles located from above on the dashboard at the windshield basis and also via lateral ventilating deflectors of the dashboard. Air temperature, an obduvayushchegostekla, and speed of purification of glasses increase in process of warming up of the engine. For acceleration of process of removal from a windshield of condensate, hoarfrost or ice it is possible to close lateral ventilating deflectors. In this case all air will go only on having blown in a windshield.

For reasons of safety it is not necessary to begin the movement until all windows of the car are not cleared of condensate, and the adequate review will not be provided to the driver.

Switching off of systems of heating and ventilation

In order that temporarily otklyuchitsistema of heating and ventilation, turn handles of regulators of the high-speed mode of the fan and air temperature in the extreme left provisions.

Need for shutdown of systems arises the first some minutes after start of the engine in cold weather as it provides faster warming up of the engine up to the temperature sufficient for effective functioning of a heater. Keep the fan in all other cases constantly included in order to avoid an air stagnation in salon.

System of climate control


The system of climate control can be included in the standard package of some models and carries out functions of management of ventilation, air conditioning otopleniya in salon. The heater and the conditioner of air provide maintenance of the set air temperature. Besides, the system climate-kotrolya automatically carries out a choice of the high-speed mode of the fan and makes distribution of distribution of air depending on the set temperature.

The direction of the streams of air coming to salon from the central and lateral ventilating snuffled, it can be adjusted manually, by means of mobile deflectors of lattices, - rychazhka of control of deflectors are located in the middle of ventilating grates. At desire, air supply via lateral deflectors of the dashboard can a bytpolnost is stopped.

Functioning of system in the automatic mode


The control panel functioning of systems of heating, ventilation and air conditioning on the models equipped with system of climate control

1 — the regulator Handle temperaturyvozdukha / the button of inclusion of the automatic mode of a funktsionirovaniyasistema of climate control
2 — the Button of management of functioning of the fan
3 — the Button of switching off of an avtomaticheskogorezhim
4 — the air conditioner Switch

5 — the Switch of a choice of rezhimazamknuty air circulation
6 — the Button of switching of a rezhimovraspredeleniye of air
7 — the Switch of heating of a zadnegostekl

Transfer of system of climate control in the automatic mode of functioning by a nazhimaniye on the AUTO button on the dashboard. Establish by rotation of the handle of the regulator of temperature desirable air temperature. On the screen of the display of system the inscription "FULL AUTO" has to be highlighted. The control lamp informs the operator on inclusion/switching off of the mode of the closed circulation.

The system automatically creates an optimum combination arriving via the conditioner and/or the heat exchanger of a heater of air streams, providing the fastest warming up or cooling of air in salon up to the set temperature.

For the fastest warming up or cooling of air in salon include the mode of the closed air circulation and turn temperature regulator handle one of extreme (left or right) provisions, - thus the limit of adjustable temperature is established top (32 °C) or lower (18 °C). If the regulator of air temperature is turned in one of extreme provisions, the system will work in the constant mode, without being switched off, and warming up/cooling air with the greatest possible efficiency. Thus the system does not control the current air temperature in salon of the car. If to install the handle of the regulator in one of promezhutochnypolozheniye, the system will automatically maintain the set air temperature in salon of the car.

The fan automatically turns on in cold weather only after the engine worked some time and a heater is ready to heating of air.

Shutdown of system of climate control is carried out with the help knopk by "OFF". The system should not be in the disconnected state a little long time. In order to avoid stagnation of air and emergence of unpleasant smells it is recommended to keep in salon constantly the fan included.

Functioning of system in the semi-automatic mode

There is a possibility of manual inclusion of any of functions of system of climate control when it works in the automatic mode. Thus automatic control of all other functions of system remains. Any of buttons of management transfers to Vzhimaniye system to the semi-automatic mode, - the control lamp which is built in the AUTO button, and an inscription of "FULL" on the display have to go out.

The conditioner joins and switched off by means of the A/S button. The condition of the conditioner is reflected by the corresponding inscription in the display: "ON" (Is included) or "OFF" (Is switched off). At manual turning on of the conditioner the system of climate control does not provide cooling of the air coming to salon, ambient temperatures are up to one temperature lower. At the working conditioner expose comfortable value of temperature of the air given to salon by means of the handle of the corresponding regulator.

The button with the image of the pictogram is intended for inclusion and switching off of the mode of the closed air circulation. If the control lamp which is built in this button burns, therefore, in system the air closed in volume of salon of the car constantly circulates. If the control lamp is switched off, so receipt in salon of fresh air from the outside which is carried previously in system of climate control to the set parameters takes place. There is a possibility of manual inclusion of the mode of the closed circulation, for example, at an entrance to a zone with the filled with smoke or polluted atmosphere, - at inclusion of the mode the control lamp which is built in the button lights up.

The button with the image of a krylchatka allows to regulate the speed of rotation of the fan manually. By the first pressing the button the fan passes from the automatic mode in manual and starts rotating with the minimum speed. Each subsequent pressing the button leads to step-by-step increase in speed of rotation of a krylchatka. The current level of the high-speed mode of the fan is reflected in the control panel display in the form of a comb. On reaching a maximum level the next pressing the button transfers the fan to the mode of the minimum speed.

The MODE button is intended for switching of the directions of distribution of air on salon of the car. By each pressing the button there is a switching of the modes in a certain sequence that is displayed by highlighting of the corresponding pictograms on the panel display management. For viewing of all possible modes it is necessary to press the button four times:
a) Air of a postup of t in salon
at the same time through nozzles of an obduv wind and lateral glasses, the dashboards located on the top shelf, and also through the lower air vents;
Ь) The main part of the air coming to salon moves in driver's and passenger foot wells through the lower air vents;
c) Air comes to salon at the same time via the central and lateral deflectors in the dashboard, and also through the lower air vents;
d) The main part of air arrives via the central and lateral deflectors of the dashboard.
By pressing the button with the image of the pictogram the main part of the air coming to salon moves on having blown in a windshield, than its fast defrosting is provided. This button has a priority and cancels previously set air distribution mode.
By pressing the button with the image of the pictogram the air conditioning mode with its inflow from the outside automatically joins. For faster effective udaleniyaineya or frost from a windshield, choose the maximum speed of rotation of the fan. Air supply on having blown in a windshield it can be increased at the expense of an overshoot of the lateral snuffled. Repeated pressing the button returns system in a former operating mode.

The button of heating of back glass serves for removal of condensate and hoarfrost from back glass of the car.

Sensors of sunlight and temperature of air


System of climate control are a part two information the sunlight datchika:datchik established from above dashboards, and the air temperature sensor close to a steering wheel. Try not to put from above on the sensor any subjects and do not allow hit on them any liquids.


Audio system

As a rule, the audio system is not a part of a standard complete set of the car and is installed as the additional equipment.

The firm audio system provides purity of sounding in all ranges of frequencies and differs in simplicity of switching off of favourite radio stations by means of keys of preliminary control.

The cassette sound board is supplied with system of noise reduction of Dolby, automatic detection of installation chrome-dioksidnoy of a magnetic tape and the function of an automatic reversion providing possibility of continuous reproduction of records from both paths of a tape without reinstallation of the audio cassette.

The used Dolby system made according to the license Dolby Laboratories LicensingCorporation. "Dolby" DD, and also the pictogram are the registered trademarks of the DolbyLaboratories Licensing Corporation company.


Radio receiver

Inclusion


The audio system functions when the ignition key is in the provision of "ASS" (I) or "ON" (II). In the first provision of a key food of auxiliary consumers of the electric power joins, in the second - ignition and food of all consumers of the electric power is included. For turning on of the audio system press a narukoyatka of "PWR" or the button of switching of radio frequency ranges. Adjustment of level of loudness is made by rotation of the PWR handle.


At turning on of the audio system on the display of the control panel of the radio tape recorder the indicator of the chosen radio frequency range and value of frequency of a radio signal on which the radio receiver before food switching off was adjusted is highlighted. To pass into other radio frequency range, press switchings of ranges the button. At turning on of the radio receiver in the range of U/FM and its control for radio station which broadcasts in the stereophonic mode, on the display the ST indicator (Stereo) is highlighted. If the car got to a zone of uncertain reception of a stereosignal, the ST indicator starts blinking.

Possibility of stereophonic reception of broadcasts in other ranges is absent.

Control


In any of three ranges the radio receiver allows to make control in four ways: manually (TUNE), semi-automatic (SEEK), automatically by scanning of range and control (SCAN) or automatic control for previously chosen radio stations which frequencies are brought in memory of the radio receiver.
Manual control (funktsiyatune) is made by means of the TUNE key. Press the right or left part of the TUNE key respectively to change the frequency of setup of the radio receiver towards reduction or increase respectively. During the pressing and deduction of a key in the pressed situation control frequency nachinayetizmenyatsya it is continuous. The current frequency of setup of the radio receiver is reflected in the radio tape recorder control panel display. Release the TUNE key as soon as the receiver is adjusted on the necessary frequency. To change the frequency of control for one discrete step, shortly press and release the TUNE key.

Also the mode of semi-automatic control is provided (SEEK function). At inclusion of this function the radio receiver finds in the current range radio station with a strong signal and is independently adjusted on it. For turning on of radio receivers the mode of search it is necessary to press and hold the right or left part of the SEEK key. Search of radio station will happen to rather strong signal in the lower or top subrange of rather current frequency of setup of the radio receiver, depending on on what part of a key the nazhimaniye is made. Search stops as soon as the receiver finds the first radio station with a strong signal.

At inclusion of function automatic control of scanning of range (Scan Function) the radio receiver finds all radio stations with rather powerful signal izlucheniyav the current range. For turning on of the radio receiver in the mode of scanning of range it is necessary to press and release the SCAN button. Search of radio stations will happen to a strong signal in all chosen range. At identification of a signal to the demanded intensity search stops, and within about five seconds the radio receiver accepts a radio signal on this wave. If during this time no buttons are pressed, the radio receiver passes to further scanning of range and search of the following radio station with a strong signal which will also accept within about five seconds. If during scanning of range the signal from station to which you would like to listen further was found, press once again the SCAN button.

Setup of the radio receiver for previously chosen stations. By means of six buttons marked with numbers from 1 to 6 it is possible zanestiv memory of the radio receiver of frequency of favourite radio stations. In the stereoradio tape recorder of A type each button allows to program on one radio station in each range. The design of the stereoradio tape recorder of V type allows to record by means of each izshesta of buttons one frequency in radio frequency range of AM and two frequencies in FM range (on one in the subranges of FM1 and FM2). To program memory of the radio receiver, execute the following operations:

a) By means of the corresponding button choose the demanded range of radio frequencies;'
b) By means of the TUNE key, SEEKILI SCAN adjust the radio receiver on desirable radio station;
c) Choose one of six buttons of programming of memory for this radio station, press and hold it until hear a short sound signal;
d) Repeat operations with the first on the third to bring in memory of the radio receiver of frequency of six radio stations;
e) Now it is enough to press any of six buttons of programming of memory of the radio receiver that it was automatically adjusted on previously chosen station which frequency of a signal is brought in the corresponding cell of memory.
6 Frequencies of preliminary settings of the radio receiver are erased from memory at failure (the strong category or shutdown of a battery room of a batarei also at extraction of a safety lock of the audio system.

Automatic programming of memory of the radio receiver


During considerable removal from the location of transmitting stations the radio receiver cannot accept more signals at the frequencies chosen earlier. Thus there is an opportunity fast (in the automatic mode) reprogrammings of memory of system on signals of local stations.

For inclusion of function of automatic programming of memory press the A.SEL button, - on the display of the control panel of the radio tape recorder the A.SEL indicator will light up. The radio receiver within several seconds will scan all ranges and will bring in memory of frequency of stations with the strongest signal.

The radio receiver remembers to six stations in VHF range (a stereomanitol of type A) or six stations in the range AM and twelve stations in FM range (the stereoradio tape recorder of V type). The subsequent setup of the radio receiver for the programmed stations is carried out in the regular way by means of buttons with numbers from 1 to 6.

If the car is on considerable removal from the developed network of radio stations, the receiver can not obnarzhit enough local radio stations with a strong signal to fill all available cells of memory (12 or 18). In this case when pressing the button of preliminary control corresponding to a free cell of memory on the display of the control panel the indicator "0" will light up

At inclusion of the mode of avtomaticheky programming it is possible to program manually some cells of memory by means of control buttons.

It should be noted that at inclusion of the mode of automatic programming there is no deleting from memory of the radio receiver of frequencies of the stations which are earlier brought in it. After return home press the A.SEL button still time to switch off the mode of automatic programming of memory. Thus by means of buttons of preliminary control access to frequencies which were programmed initially is provided.

System of radio data of RDS (only for autoradio tape recorders of A type)

Autoradio tape recorders of A type give opportunity to use the developed service functions of system of radio data of RDS.

RDS button. If the radio receiver works in the range of U (FM), it can automatically be recustomized on frequencies of various regional radio stations transferring the same program in a long journey it izbavitvas from need periodically to change setup of the receiver and provides high quality of reception of transfer.

Functions of reception of information of RDS become more active automatically at turning on of the radio tape recorder. If the radio station on which the radio receiver is adjusted, broadcasts in the RDS standard, on the radio tape recorder control panel display instead of the frequency of a signal there will be a name of the accepted radio station. If the program is at the same time transferred at several frequencies, the radio receiver will automatically choose and will be adjusted on that frequency at which the best quality of reception (the strongest signal) is provided. These RDS functions relieve you of need to recustomize the radio receiver if you are in the region with the developed network of RDS radio stations.

During removal of the car from the RDS transmitting station on distance where the signal cannot be accepted surely any more, the receiver remembers the last frequency of control and brings its value to the display instead of the name of radio station.

To switch off the RDS function of the radio receiver, press and hold pressed the TPA/RDS button not less than two seconds. Thus "RDS" indicator on the display of the control panel will go out.

TR indicator. At setup of the radio receiver for RDS station which works in the mode of transfer of road messages, on the display the TR indicator automatically turns on. Road messages are transferred by such stations periodically or as required in intervals or during broadcast of other radio programs in the range of U (FM). Therefore if on the display of the control panel of the radio tape recorder the TR indicator burns, you can hear operational road information.

TRA function. To find RDS station which works in the mode of transfer of road messages, shortly (no more than two seconds) press the TPA/RDS button. Thus on the display of the control panel of the radio tape recorder the TRA indicator will be highlighted. If the radio receiver is already adjusted on the station working in the mode of transfer of road messages (on the display "TR" indicator burns), it will continue to work as before. In case the receiver is adjusted not on TR station, or a signal of TR station insufficiently strong, in 70 seconds will work the sound warning signal. Then every 30 seconds the radio receiver will include the warning signal until the TRA function is not switched off by repeated short-term pressing the TPA/RDS button. The warning buzzer will be disconnected at setup of the radio receiver for other TR station by means of the handle of "TUNE", the SEEK buttons or buttons of preliminary control.

During reproduction of records on the audio cassette or a compact disk, you will also be able to hear operational road information. At TRA vklyuchennoyfunktion (on the display the TRA indicator burns) and control of a radiopriyemnikan a wave of TR station which works to a vrezhima of transfer of road messages (on the display the TR indicator burns), reproduction of records from a compact disk audiokassetyila automatically interrupts as soon as broadcast of road information begins. During reception of road messages on the display the TRF-INFO indicator burns. Besides, volume of sound automatically is established on previously set level irrespective of the current position of the handle of the regulator of loudness.

After the end of broadcast of road information the radio tape recorder revolves reproduction of record from the audio cassette or on a compact disk.

PTY function. At short (less than two seconds) pressing the button "PTY" joins the PTY function. This function allows to learn type or a genre of the program which is broadcast by radio station. For example, if record of a performance is transferred, on the display of the control panel of the radio tape recorder the DRAMA indicator will be highlighted. Broadcast of discussions of any scientific problem is followed by highlighting of the SCIENCE indicator, etc. If the RDS radio station does not transfer data on a genre of the broadcast program, on the display there is a NONE indicator.

In that case when the radio receiver is adjusted not on RDS station, on the display the NO RDS indicator lights up. Thus the PTY function is automatically switched off and the display reverts to the original state (in the absence of other teams).

At the included PTY function you can use keys "TUNE" or "SEEK" quickly to find radio station which transfers the program of a genre necessary to you. When pressing the TUNE or SEEK keys on the display the messages designating various genres of broadcasts, for example, "NEWS" (News), "AFFAIRS" (Business), "INFO" (Information), "SPORT" (Sport), etc. will be highlighted. As soon as on the display there is a designation of a genre necessary to you, quickly (is more short than two seconds) press the button of" PTY". The radio receiver will turn on in the mode of automatic search of transfer of the set genre. If at present transmission of the chosen genre is not broadcast by any station, on the display the message "NO PTY" is displayed. Six seconds later the NO PTY indicator dies away, and the mode of automatic search of radio station in the set genre of the program is switched off.

The mode of automatic search of radio stations in the set genre of the broadcast program is switched off also in case after a choice of the necessary genre of transfer (by means of the TUNE handle or the SEEK buttons) within five seconds any button was not pressed.

Indicator of prime reception of news. When keeping of the PTY button pressed within more than two seconds the mode of prime reception of news joins. Thus on the display there will be a message of "NEWS" (News). In this mode the radio receiver will accept first of all headline news from all radio stations, regardless of the program chosen earlier (only transfers of road messages of TR do not interrupt).

EON indicator. If transfer of headline news is carried out by radio station, other than that on which your radio receiver was adjusted, on the display the message of EON is highlighted.

Adjustment of stereobalance front/back. The design of the control panel of the autoradio tape recorder allows to adjust separately the loudness of sounding of the left/right and forward/back loudspeakers of the speaker system. In the first case the stereobalance, in the second - balance the front/back is regulated.

Adjustment of a sound

The stereobalance and balance the front/back are regulated by means of the BAL / FAD button. Pressing of a key changes the adjustment mode from stereobalance for balance the front/back, then, rotating the ring PWR regulator, adjust the loudness of sounding of the left/right and forward/back loudspeakers of the speaker system.

Adjustment of a timbre of sounding. Timbre coloring of a sound is regulated spomoshchyyu the TREBLE/BAS buttons. Nazhimany on the button makes switching of the modes of adjustment of low and high frequencies. Then, rotating the ring PWR regulator, adjust voluntarily a sound timbre in the range of low and high frequencies. Further, rotating the ring PWR regulator, adjust voluntarily a sound timbre in the range of low and high frequencies.

Cassette sound board

General information


The scheme of an arrangement of governing bodies of reproduction of records from a magnetic tape on the forward panel of the radio tape recorder is submitted on illustrations.

Turn on the radio tape recorder, having pressed the PWR button. Deploy the audio cassette so that its party with an open site of a magnetic film was on the right. Then insert the cartridge into a reception window of a sound board. The audio cassette has to enter a reception window almost completely then there is an automatic loading of a magnetic tape into position and record reproduction begins.

The indicators executed in the form of the arrows directed up and down and the radio tape recorder control panels located on the display, show the direction of the movement of a magnetic tape and number of the lost path. To replace a path and the pereklyuchitnapravleny movements of a film with the return, press the PLAY button (Reproduction).

Function of an automatic reverse provides possibility of continuous playing of the audio cassette: on reaching the end of a film the cassette sound board automatically switches the direction of rewind of a film to the return. Thus record from the second path of magnetic Lena is reproduced.

The mode of suppression of noise of Dolby joins automatically at once after introduction of the cartridge to a reception window of a sound board. If record on the cartridge was carried out without use of the mode of noise reduction, turn off this mode on the player, having pressed the button with the image of the pictogram.

Extraction of the cartridge from a sound board is made by means of the EJECT button.

Function of search of a musical fragment

Sound board design a predusmatrivayetvozmozhnost of search of the necessary record during playing of magnetic record. Search is run by means of buttons of fast rewind of a tape "by FF2 ", REW", "RPT" or "SKIP".

Fast rewind of a film forward and back. Two FF buttons and "are intended to REW" for inclusion of the modes of fast rewind of a magnetic film forward and back. Quickly to rewind a film back, press the REW button. Rewind is carried out by means of the FF button forward. Thus on the display of the autoradio tape recorder the indicator representing the corresponding letters will light up. For a stop of fast rewind of a film forward or it is necessary to press the PLAY button back. If in the mode of fast rewind the end of a magnetic tape is reached, the direction of rotation of the cartridge automatically changes naobratny and reproduction of record begins with other path of a film.

Mode of the admission (SKIP). The mode of the admission allows to pass the song or a fragment of record on an audio cassette film. For inclusion of the mode of the admission press the SKIP FF or SKIPREW button, depending on what piece of record gather propustit:predshestvuyushchiya to this moment of reproduction, or following it. If you want to return to the beginning of a song or fragment of record which are reproduced at present, press the SKIP and REW buttons at the same time. Thus on the display for the period of the return rewind of a film poyavitsyaizobrazheny letters of "REW". If you want to pass to the beginning of the following song or fragment of record, press at the same time the SKIP and FF buttons. Thus on the display for the period of rewind there will be an image of letters of "FF" forward. When the system finds the beginning of the following record on a film, the reproduction mode automatically will join.

Repeated reproduction of record. This function allows to repeat reproduction of the same record automatically repeatedly. Function joins when pressing the RPT button. At the same time on the display of the control panel of the radio tape recorder the inscription of "RPT" will be highlighted. On reaching the end of the current record fast rewind of a film back for the beginning of this record automatically joins. The player will continuously reproduce the same record until the RPT button is not squeezed out repeatedly.

Realization of the service functions of the admission and repeated reproduction of record described above is based on use of free intervals between separate fragments of record on a magnetic tape. These service functions can incorrectly work if duration of pauses between separate records is too small, or the level of a noise background in pauses is excessively great. Besides, in the presence of inside fragment of pauses, they will be perceived by the player, as the intervals separating separate records on a magnetic tape.

Care of the radio tape recorder


In use autoradio tape recorders the magnetic head of a cassette sound board gradually becomes soiled deposits of dust and the particles of a magnetic layer showered from a film. At considerable pollution of a magnetic head quality of a sound at reproduction of records worsens. In view of told, it is necessary regularly, to make cleaning of a magnetic head in each 30 business hours of a sound board.

The negligent relation to care of the radio tape recorder and violation of the stipulated schedule of cleaning of a magnetic head can lead to a situation when removal of the accumulated deposits by means of the ordinary cleaning cartridge is impossible.

The design of a sound board provides possibility of automatic unloading of the audio cassette which for any reasons cannot normally be reproduced. If the cartridge jumps out even prior to reproduction, it speaks about its possible damage, it is not necessary to make attempts of repeated loading of such cartridge. There can sometimes be a stop of reproduction of a sound recording, single or double turning on of the mechanism of a reverse of a sound board, or unloading of the cartridge. Usually similar phenomena occur owing to jamming of the mechanism, or as a result of unevenness of resistance to rewind of a magnetic tape on cartridge coils. In this case it is necessary to take the audio cassette and manually to waste a tape on some turns of the coil.

The cassette sound board of the autoradio tape recorder is calculated on use of audio cassettes lasting record up to 100 minutes. Use of more capacious cartridges with a thin magnetic film can lead to refusal of a sound board or deformation of a film.

Attentively examine the audio cassette before inserting it into a reception window of a sound board. If the magnetic film has a considerable weak point, bring up her, rotating a coil nave in the relevant party by means of a pencil or fingers.

When flaking a label glue it or remove completely. Otherwise, the lagged behind sticker can lead to jamming of the cartridge in attempt to take it from a sound board. Do not insert the bent or broken audio cassette into a reception window of a sound board.

Do not leave the audio cassette in such places where they are affected by high temperature or high humidity, for example, on the top shelf of the dashboard or in the most cassette sound board, do not insert the overheated or overcooled cartridge into the radio tape recorder until its temperature is not normalized.

Do not insert foreign subjects into a reception window of a cassette sound board.

Remote control functioning of the audio system

The panel consists of three buttons and allows to make management of functioning of the radio tape recorder without separation rukot a steering wheel.

The top and lower buttons of the panel allow to regulate volume of sound, increasing it, - the button (tt), or reducing, - the button (uu). Press the corresponding button and hold until volume of sound does not reach desirable level.

The AUDIO/CH button (Switching of operating modes of the audio system) carries out three functions of that is listened time at present: the radio receiver, magnetic record, or record from a compact disk.

When listening the radio receiver the AUDIO/CH button allows to switch to other radio stations. Every time when pressing the button the radio receiver switches on following from the stations brought in memory of the receiver in the chosen range of frequencies. Thus on the display of the forward panel of the radio tape recorder the image of number of the chosen radio station is highlighted. For transition to other range of frequencies press the button of switching of radio frequency ranges located on the forward panel of the radio tape recorder.

At reproduction of magnetic record, pressing of the AUDIO/CH button carries out transition to the following record on a film. At the time of pressing of the button on the display of the forward panel of the radio tape recorder the blinking "FF" inscription is highlighted. The pause on a magnetic tape will be passed, and the system will pass to reproduction of the following record.

If listening of a compact disk the AUDIO/CH button allows to carry out transition to reproduction of record from the following path. Thus on the display of the stereoradio tape recorder number of a disk and path with which record is reproduced is highlighted.

Security system of the autoradio tape recorder


On the models equipped with similar system the detachment for any reasons of the audio system from the power supply leads to its blocking. To unblock system, it is necessary to enter a five-digit code by means of buttons of setup of the radio receiver for previously chosen stations. As there are hundreds of thousands such combinations, to unblock system, without knowing the correct code, it is almost impossible.

At installation of the audio system on the car the owner receives a special card with a code and serial number of a stereosystem. Authors of the present manual insistently advise to store a card in a safe and reliable place. Bring serial number of the audio system in a notebook and store it together with other documents out of the car. The new card instead of the lost can be received at firm car repair shops of the Honda company upon presentation of serial number.

In case of the category or a detachment of the battery inevitably there is a blocking of the audio system. In this case at inclusion of system on the display of the forward panel of the radio tape recorder the inscription of "Code" (Code) is highlighted. By means of buttons of control enter the demanded five-digit code. If the code is entered correctly and identified by the audio system, it starts functioning in the usual mode.

If at input of a code the mistake is made, do not try to correct it repeated pressing of buttons, - before stop entering a wrong combination, and only then enter the correct code. For introduction of a code you have ten attempts. If during ten attempts to gather the correct code did not work well, repeated attempts can be made not earlier than in an hour.

After an unblocking of system it is necessary to program anew memory of the radio receiver on reception are loved hradiostantion as at a detachment from food there is a cleaning of memory of the audio system.