Honda Accord

1998-1999 of release

Repair and operation of the car

Honda Chord
+ Cars of the Honda Accord brand
+ Settings and routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Electric equipment of the engine
+ Engine management
- Gear shifting box
   + 5-staged manual box of gear shifting (MBGS)
   - 4-staged automatic transmission (AT)
      Problem diagnostics of AT/CVT - the general information
      Removal, installation and adjustment of a cable of gear shifting
      Removal and installation of the lever of switching (selector) of transfers
      System of blocking - the general information, check of a state, replacement and adjustment of an electromagnet of management
      Adjustment and replacement of the sensor switch of provision of transmission
      Check and replacement of electromagnetic valves of management of transmission functioning
      Removal and installation 4-staged and automatic transmission (AT)
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment

Рыбалка на раков

Check and replacement of electromagnetic valves of management of transmission functioning

CHECK

PERFORMANCE ORDER

1. Three couples electromagnetic valves of management of functioning of transmission are subject to check: The valve of management of blocking/switching And, valves of management of switching In and With and valves of management of coupling pressure.

Electromagnetic valve of management of blocking/switching And

2. Disunite the 2-contact electric socket of assembly of the electromagnetic valve of management of blocking/switching And and measure resistance between each of socket plugs (from the valve) and weight. Compare results of measurements to requirements of Specifications. In case of need replace assembly of the valve.

3. By means of a wire crossing point serially connect each of socket plugs to a positive pole of the battery, - distinctly heard click accompanying operation of each of valves has to be distributed. If click it is not audible, it is necessary to drive away the car on car repair shop for carrying out full-scale diagnostics of ESM and contours of electromagnetic valves.

Electromagnetic valves of management of gear shifting In and With

4. Disunite 2-contact electric sockets of electromagnetic valves of management of gear shifting and measure resistance between plugs 1 and 2 of each of them. Compare results of measurements to requirements of Specifications. In case of need replace assembly of the defective valve.

5. By means of a wire crossing point serially connect the plug 2 sockets of each of valves to a positive pole of the battery, - the plug 1 should be grounded. Distinctly heard click accompanying operation of each of valves has to be distributed. If click it is not audible, the defective valve is subject to replacement.

Electromagnetic valves of management of coupling functioning

6. Disunite contact sockets of valves of management of pressure of coupling and measure resistance between plugs 1 and 2 of each of sockets. Compare results of measurements to requirements of spices. In case of need replace the defective valve.

7. By means of a wire crossing point serially connect the plug 1 of each of valves to a positive pole of the battery, - the plug 2 should be grounded. Distinctly heard click accompanying operation of each of valves has to be distributed. If click it is not audible, the defective valve is subject to replacement.

REPLACEMENT

PERFORMANCE ORDER

To make replacement of only one of electromagnetic valves (And and managements of coupling pressure) in an individual order it is not possible, - their replacement is made assembled whereas valves B and C can be replaced separately.

1. Turn out fixing bolts and remove valvate assembly.

2. Carefully wipe the interfaced surfaces and clean maslotok.
3. Replace sealing laying / ring and establish new valvate assembly on the regular place. Tighten fixing bolts with the demanded effort.
4. Check the electric socket for existence of signs of pollution and oxidation of contact plugs, in case of need clean and again connect.
5. Check serviceability of functioning of electromagnetic valves of management.