|
1. Weaken nuts of fastening of the corresponding forward wheel. The car also establish to Poddomkratta it on props. Remove a wheel.
2. Turn out a through bolt and disconnect from assembly of the lower control lever of a suspension bracket a damping fork (see the Section Removal and installation of assembly of the forward shock-absorber with a screw spring).
3. Disconnect from the lower lever the pushing bar (see the Section Removal and installation of the pushing bar of a forward suspension bracket).
4. Disconnect from the lower lever of a suspension bracket a rack of a bar of the stabilizer of cross stability (see the Section Removal and installation of the forward stabilizer of cross stability).
|
|
5. Take the forelock and weaken a koronchaty nut of a spherical finger of a support of the lower lever. Do not remove a nut finally yet. By means of a 2-gripping stripper remove the lever from the spherical support fixed in a rotary fist. Now finally give a koronchaty nut. |
|
|
6. Turn out an axial bolt from the inside of the lower control lever). Remove the lever. |
7. Installation is made upside-down. Do not forget to replace the forelock of fixing of a koronchaty nut of a spherical finger (see the Remark to paragraph 3 of the Section Removal and installation of a rotary fist). |