Honda Accord

1998-1999 of release

Repair and operation of the car



Honda Chord
+ Cars of the Honda Accord brand
+ Settings and routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Electric equipment of the engine
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   Care of components of a body and bottom of the car
   Care of vinyl elements of finishing
   Care of an upholstery and carpets of salon
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and locks of the car
   Replacement wind and other fixed glasses
   Removal, installation and adjustment of provision of a cowl
   Removal and installation of a latch of the lock of a cowl and cable of its drive
   Removal and installation of overlays of forward and back bumpers
   Removal and installation of forward wings
   Removal, installation and adjustment of a cover of a luggage compartment
   Removal and installation of a latch and cylinder of the lock of a cover of a luggage compartment
   Driving cables of an otpuskaniye of locks of a cover of a luggage compartment and door of the hatch of a jellied mouth of a fuel tank
   Removal and installation of panels of an internal upholstery of doors
   Removal, installation and adjustment of provision of doors
   Removal and installation of a latch and external handle / cylinder of the lock of a door
   Removal and installation of door glasses
   Removal and installation of regulators of window regulators
   Removal and installation of rear-view mirrors
   Removal and installation of the central console
   Removal and installation of finishing sections of the dashboard
   Removal and installation of a casing of a steering column
   Removal and installation of the main section of the dashboard
   Removal and installation of a forward fairing
   Removal and installation of seats
   Removal and installation of the back shelf
   Geometrical sizes of various options of execution of a body
+ Onboard electric equipment
+ Schemes of electric equipment


canada rx


Removal, installation and adjustment of a cover of a luggage compartment

The cover has the considerable weight therefore it will be reasonable to secure with the help of the assistant.

REMOVAL AND INSTALLATION

 PERFORMANCE ORDER

1. Open a trunk lid and reliably record it in the top situation. Cover the painted panels of edges of a luggage compartment with protective slips or old blankets.
2. Disunite sockets of an electrical wiring of lamps of illumination of registration plate, stoplights and the actuation mechanism of the drive of the lock. Release wires from door assembly remove the lock activator (see the Sections Removal and installation of a latch and the cylinder of the lock of a cover of a luggage compartment and Driving cables of an otpuskaniye of locks of a cover of a luggage compartment and a door of the hatch of a jellied mouth of a fuel tank).

3. Lead round levels of door loops a marker.

4. Turn out bolts of fastening of loops to door assembly and by means of the assistant remove the last.

5. Installation is made upside-down. Track that loopy levels were put according to the tags put in the course of dismantle.

ADJUSTMENT

 PERFORMANCE ORDER

1. Having finished installation of a door, close it and make sure of correctness of placement in a body aperture. Updating of the provision of a door is made by weakening of loopy bolts and shift of levels within the stock determined by ovality of bolted openings in them. Having corrected the provision of a door, do not forget to tighten fixture.

2. For adjustment of height of provision of door assembly in a body aperture weaken bolts of fastening of assembly of the drummer of the lock, as appropriate correct position of the last, then again tighten fixture.

Before weakening of bolts for orientation lead round a plate of the basis of the drummer a marker.

3. In summary adjust density of closing of a door by adjustment of height of persistent rubber pillows. In a closed position the plane of a door has to appear aflush with surfaces of surrounding body panels.