1. On the models equipped with the electric drive of external mirrors remove the panel of an internal upholstery and the moisture filter of a door (see the Section Removal and installation of panels of an internal upholstery of doors). 2. Having hooked a screw-driver, remove the triangular decorative panel of internal finishing of basic knot of a mirror. 3. At the corresponding complete set disconnect an electrical wiring from a mirror.
4. Turn out three fixing bolts and remove assembly of a mirror from a door.
5. Installation is made upside-down.
Internal mirror
PERFORMANCE ORDER
1. Having pushed assembly of a mirror down, release basic part of its arm from the assembly bracket pasted on a windshield.
The arm is fixed in a bracket by means of a spring clamp which in case of need should be hooked a screw-driver.
2. If removed, fill into place a spring clamp. Develop assembly of a mirror under 90 ° and fill basic part of its arm in an assembly bracket of the basis on glass. Push assembly top, then develop it in regular situation. Make sure of reliability of fixing of assembly in an assembly bracket.