Honda Accord

1998-1999 of release

Repair and operation of the car



Honda Chord
+ Cars of the Honda Accord brand
+ Settings and routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Electric equipment of the engine
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Search of causes of failures of electric equipment
   Safety locks - the general information
   Chain breakers
   The relay - the general information and check of serviceability of functioning
   Check of serviceability of functioning and replacement of the breaker of indexes of turns / alarm system
   Check of serviceability of functioning and replacement of understeering switches
   Check of serviceability of functioning and replacement of the switch of ignition and lock of blocking of a steering column
   Check of serviceability of functioning and replacement of switches of the dashboard
   Check of serviceability of functioning of measuring instruments of a combination of devices
   Removal and installation of a combination of devices
   Removal and installation of the radio receiver and loudspeakers
   Removal and installation of the antenna of the radio receiver
   Replacement of lamps of head headlights
   Adjustment of the direction of optical axes of head headlights
   Replacement of block headlights
   Replacement of lamps
   Running fires of light time of day (DRL)
   Check of serviceability of functioning and replacement of an electric motor of the drive of screen wipers
   Check of serviceability of functioning and replacement of horns of a horn
   Check of serviceability of functioning and recovery repair of a heater of back glass
   Control system of speed (tempostat) - general information and check of serviceability of functioning
   The electric drive of window regulators - general information and check of serviceability of functioning
   The uniform lock - general information and check of serviceability of functioning
   The electric drive of external rear-view mirrors - general information and check of serviceability of functioning
   Safety cushions - the general information
+ Schemes of electric equipment


The electric drive of window regulators - general information and check of serviceability of functioning

The control system of functioning of window regulators consists of switches of management, driving electric motors, regulators of window regulators, mechanisms of lowering lifting of glasses and a connecting electrical wiring. Electric motors of the drive of window regulators are located in door assemblies of the car.

Control of window regulators can be exercised from a driver's place by means of the main switch, or by means of manipulations with individual door switches. Each of glasses is equipped with a separate driving electric motor of reversive type. Switching of a key of the switch polarity of connection of the motor and, as a result, the direction of its rotation changes.

The contour is protected by a safety lock and the breaker of a chain. Each of electric motors is in addition equipped with the individual breaker preventing possibility of a conclusion out of operation of all system when jamming separate glass.

The electric drive of window regulators functions only at the included ignition. In addition, on many models possibility of blocking of window regulators back (and sometimes and a lobby passenger) doors from the main switch is provided. Do not forget about this function when checking refusals of screen wipers.

The described procedures have the most general character therefore if their performance does not allow to establish unambiguously a cause of failure, drive away the car for more detailed diagnostics on car repair shop.

In case of refusal window regulators always first of all check a condition of a safety lock and the breaker of a chain.

If window regulators of back doors cope only from the main switch, check conductivity of the blocking switch in the released state. Replace the faulty switch.

Check a condition of an electrical wiring on a chain site between switches and the assembly block of safety locks. Make necessary repair.

At refusal of functioning of the main switch of only one of glasses, check serviceability of operation of this window regulator from the individual switch.

The last does not belong to a window regulator of a driver's door.

If the same window regulator regularly works from own switch, check conductivity of the switch.

If the switch as it should be, check for break and short circuit a chain on a site between the suspected switch and a driving electric motor of this window regulator.

If the window regulator does not work from both switches, remove the panel of an internal upholstery from this door and check serviceability of giving of food both for the switch, and for the driving motor of the regulator (at the relevant provision of the switch).

 

 

At correct giving of food on an electric motor otelit glass from the window regulator regulator (see the Head Kuzov) and move it up-down, checking freedom of movement. Also check serviceability of a condition of the regulator. If the regulator in norm, and glass freely moves in both directions, replace a driving electric motor. At violation of smoothness of movement of components eliminate the found hindrances, grease the rubbing knots and replace the damaged details.

If food on the motor does not move, check for conductivity existence an electrical wiring on a chain site between switches and motors (in case of need address to schemes of electric connections at the end of the present Chapter). If the contour is equipped with the executive relay, check serviceability of a zapityvaniye and grounding of the last.

Having made necessary corrections, repeat check of functioning of window regulators.