The device, service and repair of Honda Accord - Check of a condition of components of the cooling system//Honda the Chord of 1998-1999 of century /

Honda Accord

1998-1999 of release

Repair and operation of the car



Honda Chord
+ Cars of the Honda Accord brand
- Settings and routine maintenance
   General information about settings and adjustments
   Check of levels of liquids
   Check of a condition of tires and pressure of their rating
   Check of level of liquid of the power steering
   Check of the ATF AT level
   Replacement of motive oil and oil filter
   Check of a state and replacement of brushes of screen wipers
   Check, service and charging of the battery
   Check of a state, adjustment of effort of a tension and replacement of driving belts
   Check of a state and replacement of the hoses located in a motive compartment
   Check of a condition of components of the cooling system
   Rotation of wheels
   Check of brake system
   Check of a condition of seat belts
   Replacement of the filtering air cleaner element
   Check of a condition of components of a power supply system
   Check of level of the RKPP transmission oil
   Survey of components of a suspension bracket and steering drive, check of a condition of protective covers of power shafts
   Check of a condition of components of system of production of the fulfilled gases
   Check of a state and replacement of spark plugs
   Check of a state and replacement of VV of candle wires, cover and runner of the distributor
   Check and replacement of the valve of system of the operated ventilation of a case (PCV)
   Check and adjustment of turns of idling
   Service of the cooling system (depletion, washing and filling)
   Replacement of brake fluid
   Replacement of liquid of automatic transmission (AT/CVT)
   Replacement of the RKPP transmission oil
   Replacement of filters of the air conditioning system
   Check and adjustment of gaps of valves (necessarily)
   Dropping indicator of intervals of routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Electric equipment of the engine
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment





Check of a condition of components of the cooling system

(each 12 000 km [7500 miles] of run or time in 6 months)

 PERFORMANCE ORDER

1. The wide range of engine failures is connected with violation of functioning of the cooling system. On the models equipped with AT, this system provides also cooling of ATF, supporting thereby optimum conditions for transmission work.
2. Check of a condition of components of the cooling system has to be made after full cooling of the power unit (not less than in three hours after an engine stop).
3. Uncover a radiator for what at first turn it to the first emphasis to the left. If the hissing indicating excessive pressure in system is heard wait for its termination, then press a cover a palm to an iprodolzhayta down to turn to the left before liberation. Carefully wash out a cover from within and outside clear water. Also wash out a jellied mouth of a radiator. From the cleared surfaces all traces of corrosion have to be completely removed. The cooling liquid which is in system has to be rather transparent. If liquid is painted in color of a rust, the system has to be washed out and filled with fresh mix (see the Section Service of the Cooling System (depletion, washing and filling)). If the level of liquid does not reach top, add in a radiator a little more mix of the demanded structure (see the Section Check of Levels of Liquids).

4. Attentively examine the top and lower radiator hoses together with the hoses of system of heating of salon having smaller diameter and located between the power unit and a partition of a motive compartment. Check hoses on all their length and in case of identification of cracks, swellings and signs of aging of material make replacement of defective components. It is usually simpler to make out small cracks when tightening a hose). Regardless of a state it is necessary to change hoses approximately time in two years.

5. Check reliability of fastening of all hoses on the unions / branch pipes. Leak of cooling liquid is usually shown in the form of potek of rusty or white color on the surfaces surrounding their source. If hoses are fixed on unions/branch pipes by collars of the twisted type, the last will be reasonable to be replaced more reliable worm or screw.
6. Having blown compressed air, or by means of a soft brush, remove from gaps between radiator heat exchanger plates old leaves, remains of insects and other garbage. Try not to damage soft plates of the heat exchanger and not to cut fingers about their keen edges.
7. Every second check, and also at the first signs of violation of functioning of the cooling system make check of a cover of a radiator pressure. If near at hand there is no suitable equipment, ask for the help on car repair shop.